The breaker panel in your Tampa home is critically important to your electricity. When something goes wrong or if your breakers are outdated, you can expect frequent trips, loss of power, and even potentially appliance and wiring damage. You need the assurance and skill of a certified electrician in order to make certain your panel is in top shape. That means you need Hoffman Electrical & A/C!
Our service team has been offering circuit breaker and breaker panel services to Florida clients for a long time now. We’re your single source for complete service including repair, installation, and even routine maintenance service. For a team you can trust to put your needs first, you can always rely on our skilled technicians and specialists.
Looking for breaker panel service in Tampa, Clearwater, St. Petersburg, Sarasota, or the surrounding areas in Florida? Contact Hoffman Electrical & A/C online, or give us a call at 866-238-3243! You can also check out our special offers!
What Is a Breaker Panel?
A breaker panel—sometimes referred to as a “circuit breaker” or “circuit breaker panel”—is the main distribution point of electricity to your home. It is made up of many circuit breakers in control of different sections—or circuits—of your Tampa home. You may not even know where your breaker panel is located, since it is often placed in a closet or basement.
Functions of a Breaker Panel
The main function of a breaker panel is to prevent electrical fires in your home. Electricity flows from an outside source (power sent from your utility company) through a service entrance and passes through various phases before passing through an individual circuit breaker in your panel.
If the amount of electricity flowing through the circuit breaker exceeds a preset amount (often between 100 – 200 amps), the circuit breaker will automatically trip—or cut power to a portion of your house—and you’ve blown a circuit! Each breaker monitors an individual circuit, and multiple outlets may be associated with each circuit and breaker.
What Causes a Breaker to Trip?
A breaker trips when too much power is flowing through it. Often times this means too many appliances are plugged into the same circuit. Common causes of a blown circuit are:
- Window-mounted air conditioners
- Hair dryers
- Microwaves/microwave ovens
- Coffee makers
Avoid tripping a breaker by turning off and unplugging appliances or other electrical devices when they are not in use.
Breaker Panel Replacement, Installation, Repair & Maintenance
Breaker Panel Installation
Without properly up to date breakers and a modern breaker panel you can be left with shoddy electrical service in your home, and may experience frequent breaker trips and loss of power. Not sure if you need a heavy-up service? No worries! Our electricians can assess your current electrical needs and make a recommendation. The location of the breaker panel or box needs to be carefully planned due to strict regulations on their placement. Our team at Hoffman Electrical & A/C can help you determine the right location for your breaker panel.
Contact us today to schedule your breaker panel installation in your Clearwater or Sarasota home.
Breaker Panel Replacement
Buildings built prior to the 1980s mostly have only 60-amp breaker panels. With the increased use of technology and electric devices in homes and new buildings are required at least a 100-amp service. If you have less, it may be time to replace and install a new breaker panel.
Contact us today to schedule your breaker panel replacement in your Tampa or St. Petersburg home.
Breaker Panel Repair
Breaker panel problems can be particularly alarming and obnoxious since typically if the panel isn’t working properly, nothing else in your home is either! When your panel is acting up or causing trouble you need a repair service team that can offer you fast and accurate solutions. Our team carries extensive experience in handling breaker panel repair, and can ensure you get the reliable solutions you deserve.
Call on our team for breaker panel repair when:
- Your breakers are tripping often
- The lights in your home are flickering
- Your breakers won’t engage after tripping
- The breaker panel is emitting a humming or buzzing sound
- The panel is hot to the touch
Contact us online or give us a call at (866) 238-3243 to schedule an appointment for breaker panel repair!
Breaker Panel Maintenance
Maintenance services can ensure you’re getting the most from your home panel. Our specialists will provide a thorough check of the system, an assessment of your current electrical needs (to ensure they are being met), and the tuning and calibration needed to be certain you can expect a long life from your current panel.
Our specialists offer an affordable maintenance service that can help you reduce potential risks, increase the effectiveness of your home’s electrical, and can help save costs on costly repairs!
It is best to let a licensed electrician repair or perform maintenance on the breaker panel located in your home. At Hoffman Electrical & A/C, we repair and perform routine maintenance on breaker panels throughout the Tampa and St. Petersburg, FL areas at an affordable price.
Give Hoffman Electrical & A/C a call at (866) 238-3243 to request service today!
Why Choose Hoffman Electrical & A/C for Breaker Panel Services in Hillsborough & Pinellas County?
Family owned and operated since 1989, Hoffman Electrical & A/C provides high-quality electrical craftsmanship. With over 25 years of industry experience, our professionally trained and licensed electrical technicians can help solve any electrical issue in your Tampa or St. Petersburg home. We offer:
- Up-front, fixed pricing
- Written warranties
- Hoffman Signature Savings Club
- And more!
Call Hoffman Electrical & A/C at (866) 238-3243 or contact us to schedule your electrical services today!
Breaker Panel FAQs
How do I reset a tripped circuit?
If you tripped a circuit, first locate your breaker panel (usually found in a garage, basement, closet, or hallway). Find the panel, open it, and identify the tripped breaker by looking for the breaker that is neither in the “on” or “off” position. It may be orange or red in color to quickly find it. Once the tripped breaker is located, push the switch to the “off” position and then back to the “on” position. Your breaker should now be aligned with the rest of the breakers on your circuit panel and should be working.